← MOT fails
MOT fail: tyre cut deep enough to reach the ply
Major defect: the vehicle fails
Tyre has a cut in excess of the requirements deep enough to reach the ply or cordsDVSA wording, MOT inspection manual item 5.2.3 (d) (i)
The tester found a cut in a tyre deep enough to reach the ply or cords, the layers of fabric or steel inside it, and longer than the manual allows.
Can it be driven away? Only if its current MOT is still valid and no dangerous problem was listed, and it must still be roadworthy. GOV.UK rule
- 1 in 84of all MOTs fail on it
- 2%repaired during the test
- 1 in 33failed on it again at the next MOT
What happened after the fail
- Repaired during the test2%
- Passed a retest within 35 days94%
- Not passed within 35 days3%
By age
By mileage
Models that fail on this more than other cars their age
22 more models
- Before it fails: tyre has a cut
- Tyre tread below the legal limit
- Tyre has ply or cords exposed
- All MOT fails
Counted from DVSA records of 286,058,652 MOTs, 20 May 2018 to 18 October 2026. A test and its retests count as one MOT. About other vehicles, not a prediction for yours: for what to do, ask a garage. Spotted a mistake? Email fuzzyreguk@gmail.com.
Check a car's MOT history
Every test, fail and advisory, free, from the whole registration.